Durst Omega 2 - Servicing Print Heads and the Printing Plate; Preparing for Cleaning

Omega 2 H S e rvice
Completing cleaning procedure 12. Dry emission window with a dry paper towel if necessary.
13. Mount UV unit.
14. Make cable connections.
15. Close housing cover.
16. Switch on printer.
10 Servicing print heads and the printing plate
10.1 Preparing for cleaning
Tools/Accessories:
 Protective gloves
 Safety goggles
 Cleaning cloth
 Cleaning solution (Rho Cleaning Solution 2)
✔ The printer is switched on
1. Switch off U V lamp system.
2. Push print carriage to the left manually via the cleaning access point.
–or–
Carry out the following procedure in the software:
– Click Printer.
–SelectPrinter tab.
– Click the Go Right button under Printhead Carriage.
2004 – 2014 © Durst Pho totechn ik AG – www.durst-online.co m , Omega 2 , Issued 07/201 4 79 / 91