Durst Omega 2 - Sucking out Nozzles

H Service Omega 2
Contact with ink!
Health hazard
Wear protective gloves.
Wear safety goggles.
Avoid allowing ink to come into contact with skin and eyes.
1
2
Fig. 53 Preparing for cleaning
3. Pull out light trap carrier (1) completely.
4. Open cleaning access point (2).
 The printer is prepared for cleaning.
10.2 Sucking out nozzles
Contact with ink!
Health hazard
Wear protec tive gl
oves.
Wear safety goggles.
Avoid a llowing ink to come into contact with skin and eyes.
1. Ensure that the silicone hose is clean and cut at a right angle.
80 / 9 1 2004 – 2014 © Durst Ph ototechnik AG – www.d urst-online .com , Omega 2, Issued 0 7/20 14