H Service Omega 2
8. Remove excess lubricant from the nipples with cleaning paper.
9. Lubricate guide rails with the specified oil.
7 Cleaning housing
Tools/Accessories:
Damp cloth or dust brush
Penetration of moisture into the printer!
Electric shock and damage to the printer
Do not clean printer with high-pressure cleaner.
Use only a slightly moist cloth or dust brush to clean the housing.
Use a slightly moist cloth or dust brush to clean the housing.
8 Changing main ink filters
Themaininkfilters prevent the print heads from being damaged by soiled
inks. A possible indication of filter stoppage is error message 9145: Timeout
error caused by ink level sensor of one color head.
Tools/Accessories:
Protective gloves
Safety goggles
Specified cleaning cloth
Specified ink filters
Contact with ink!
Health hazard
Wear protective gloves.
Wear safety goggles.
Avoid allo win g ink to
come into contact with skin and eyes.
Energized components, even when the printer has been switched off!
Risk of death via electric shock
Switch off p
rinter with the main s witch.
74 / 9 1 2004 – 2014 © Durst Ph ototechnik AG – www.d urst-online .com , Omega 2, Issued 0 7/20 14
To Next Page
Loading...
