Durst Omega 2 - Calling up Statistics; Opening Statistics; Calling up Printer State Via the Network

FSoftware Omega 2
We recommend carrying out no more than 2 correction steps per print
carriage traversal.
Encoder Offset If you change the encoder offset, the value is automatically changed in the
medium channel.
You can also change the encoder offset during printing if necessary.
5.3.1 Changing the encoder offset
If stripes are visible in a color area of the image, proceed as follows:
– White stripes: Reduce encoder offset (negative values are also
possible)
– Black stripes: Increase encoder offset
5.3.2 Initiating printing process in the queue
1. Close s liding doo rs.
2. Click Queue.
 The queue appears.
 All jobs in line for printing are displayed in the queue.
3. To print a job, carry out the followin g steps:
– Select desired job.
– Click Start Queue.
 The current print status is displayed on the st
atus line.
 When the end of the queue is reached, a message is displayed. If
a GSM module is installed, the message is passed on to the preset
mobile phone.
6 Calling up statistics
The printer writes a daily te xt fi
le that informs you about the statistical data
such as the width and length
of jobs, number of copies, ink consumption or
start/stop time. A new lin
e is written for every print. The name of the text file
always begins with DPJobS
tate. This is followed by the respective date.
6.1 Opening statistics
1. O pen images/HotFolders/Statistics in the workstation folder.
2. Open the respecti
ve text file, for example with MS Excel.
7 Calling up printer state via the network
You can call up the printer state from any computer in the network. The printer
state is displayed in the Printer State window.
64 / 9 1 2004 – 2014 © Durst Ph ototechnik AG – www.d urst-online .com , Omega 2, Issued 0 7/20 14