Durst Omega 2 - Setting Suction Area; Procedure; Changing Media

E Operation Omega 2
5 Setting suction area
5.1 Procedure
1
2
Fig. 13 Setting suc tion area
Fig. 14 Sign: P ositions of the pull levers for suction areas
Set the suction area in the cleaning access point with the pull levers (2).
Thepositionsbasedonthemediawidthcanbefoundonthesign(1)
on the inside of the door.
6Changingmedi
a
Before a media change is performed, the unloading process must be
carriedoutinthesoftwaretoswitchoffthesuction.
34 / 9 1 2004 – 2014 © Durst Ph ototechnik AG – www.d urst-online .com , Omega 2, Issued 0 7/20 14