Durst Omega 2 - Workstation; Requirements for Installation Site; Scope of Delivery

J Appendix Omega 2
Parameters Value
Media width
 Max. 1600 mm (63 in)
 Minimum plate media width = m e dia weigh t / 0.04
Printable media width for flexible media 300 …1590 mm (11.8…62.6 in)
Plate length
 Min. 420 mm (16.5 in)
 Max. 2000 mm (78.7 in)
Outer diamete r of the roll medium
Max. 210 mm
Core diameter for roll medium 76.2 mm (2.9 in) with Rho Axle 76
Media weight Max. 50 kg
1.4 Workstation
Parameters Value
Operating system
Red Hat Enterprise Linux
Ports
 USB
 Ethernet: 10/100/1000 Mbps
1.5 Requirements for installation site
Parameters Value
Maximum altitude
2400 m (8000 ft) above sea level
Temperature range
+15°Cto+30°C(59°Fto86°F)
Relative hum idit y
40 to 80%, non-condensing
Fresh air supply
Min. 600 m
3
/h (2 1,200 cu. ft./h)
Ozone content in the exhaust < 0.1 mg/m
3
Temperature of the exhaust < 50 °C
Illumination Min. 500 lx
2 Scope of delivery
The basic equipment scope of delivery includes:
 Printer
 Workstation with monitor
 Durst printer software
 1 axis for core diameter 76 mm (3 in), media length up to 50 m (170 ft),
max. media diameter 20 cm (7.8 in)
 Omega2OperatorKit
 Operating instructions
 Standard packaging
88 / 9 1 2004 – 2014 © Durst Ph ototechnik AG – www.d urst-online .com , Omega 2, Issued 0 7/20 14