Omega 2 B Safety
8.1 U V light
UV light emitted by the UV lamps onto the print carriage can cause lethal
burns and damage to the eyes. The viewing windows filter out UV rays.
Do not remove the sliding doors.
Check to make sure the sliding doors are closed and locked during
printing.
8.2 H ot surfaces
The UV lamps on the print carriage are heated up to temperatures exceeding
65 °C (149 °F). Contact with the UV lamps can cause severe burns.
Before carrying out work on the UV lamp head wait at least half an hour
after the unit has been switched off until the lamps have cooled down.
Wear protective gloves when working on the UV lamp head.
8.3 Electrical energy
The printer has a leakage current greater than 3.5 mA. Safe operation of the
printer is ensured via a fixed connection to the ground wire.
The entire unit is not de-energized even when the main switch is switched
off. Only the separator element set up and defined during installation can be
used as the power isolator.
Do not touch any cables or electrical components even when the main
switch is switched off.
8.4 R otating parts and print carriage
Hair, jewelry and clothing can be caught by rollers and the conveyor belt and
drawn in. This can lead to lethal crushing injuries to limbs.
Danger of knocks and crushing during u ncontrolled movements of the print
carriage.
Do not remove the sliding doors.
Do not remove the covers.
Do not wear long hair, jewelry or loose clothing.
8.5 D anger of crushing from the roll mounts
When inserting the ends of the axes into the roll mounts, there is a danger
of crushing due to the high weight of the medium.
Wear protective gloves.
When loading the roll, do not grip the ends of the axes.
8.6 C ontact with ink
Coming into contact with ink is harmful to your health. Dangerous areas are:
2004 – 2014 © Durst Pho totechn ik AG – www.durst-online.co m , Omega 2 , Issued 07/201 4 15 / 91
To Next Page
Loading...
