Durst Omega 2 - Media Specifications

Omega 2 J Appendix
Parameters Value
Resolution
 Standard Printing Mode: 576 x 600 dpi
 Fine Art Mode: 1200 x 900 dpi
 Expert Mode: 1728 x 600 dpi
Standard CMYKColors
Optional
 Light cyan and light magenta
 White
 Spot colors (on request)
Ink supply unit
Refill ink in 1 liter refill containers and 2 liter intermediate
tanks for interruption-free printing
Software Omega RIP + with Durst O mega printer driver for Linux and
Macintos h operating systems
RIP
RIP input file
formats
All formats supported by Caldera®
1.3 M edia specifications
1.3.1 Media
Parameters Value
Media  Plate media:
– PVC hard foam
– Soft foam plate
– Aluminum composite plate
– Acrylic
– Polypropylene
– Polycarbonate
–PVC
 Roll media:
– PVC self-adhesive film
– PVC banner
– Polyester textile with back layer
– Polyester film
– Paper
– Backlit paper
1.3.2 Dimensio n s
Parameters Value
Printing width
 Plate media: max. 1600 mm (63 in)
 Roll media: max. 1590 mm (62.6 in)
Printing length Limited only by medium length
Media thickness Flexible media:
 Flexible media: 0.15 mm to 2.5 mm
 Rigid media: 1 mm to 50 mm
2004 – 2014 © Durst Pho totechn ik AG – www.durst-online.co m , Omega 2 , Issued 07/201 4 87 / 91