Omega 2 H S e rvice
When? What?
In case of soiled
nozzles
Suck out nozzles (→ Page 80 / Sucking out
nozzles).
Standstill of 4 to 14
days
Carry out t he follo win g me as ure s:
– Switch printer on every 4 days.
– Print a test im age.
– Check to make sure all nozzles are
printing. Clean print heads if necessary.
–or–
Have print heads filled with fresh,
non-degassed ink by Durst customer service.
Standstill longer than 2
weeks
Notify Durst cus to mer s er vice .
2 Cleaning conveyor belt
1. R em ove soiling w ith adhesiv e tape.
Penetrating moisture!
Damage to the printer
Do not put isopropyl alcohol directly on the conveyor belt. Put it on the
cleaning cloth instead.
2. Saturate a cleaning cloth of the specified type with isopropyl alcohol and
clean conveyor belt.
3 Clean light trap carrier
Tools/Accessories:
Protective gloves
Safety goggles
2004 – 2014 © Durst Pho totechn ik AG – www.durst-online.co m , Omega 2 , Issued 07/201 4 69 / 91
To Next Page
Loading...
