4 Wiring with 800
4.5 Working with contacts and coils
114 Control Relay easy800 11/11 MN04902001Z-EN www.eaton.com
The easy800 device closes entry mode as soon as you leave a contact or coil
field with úí or OK.
4.5.4 Deleting contacts and coils
▶ Use úíÍÚ to move the cursor to a contact or coil field.
▶ Press DEL.
The contact or the coil will be deleted, together with any connections.
4.5.5 Creating or changing connections
Contacts and relay coils are connected with the wiring arrow in Connect
mode. The easy800 device displays the cursor in this mode as a wiring
arrow.
▶ Use úíÍÚ to move the cursor to the contact or coil field from which you
wish to create a connection.
▶ Press ALT to switch to “Connect mode”.
▶ Use úí to move the arrow between the contact and coil fields and use ÍÚ
to move between the rungs.
▶ Press ALT to leave Connect mode.
The easy800 device closes the mode automatically as soon as you have
moved the arrow to an occupied contact or coil field.
In the contact field to change I01
to I02
In the coil field change Ä Q01 to SQ08
I 01 I 02 Ä Q 01 S 0Q 01 S 0Q 01 S0Q 08
M 1 x í +
1 x Í
03 OK
+ 3 x í
+ OK
R
2 x ú
+ 2 x Ú
+ OK
T
1 x í 02 Ú
Q 04 S Q 03
HW
05 ä S.
…06 È SN .
. è ….
. Å 08
.
OK 99 OK
To Next Page
Loading...
