4 Wiring with 800
4.5 Working with contacts and coils
116 Control Relay easy800 11/11 MN04902001Z-EN www.eaton.com
4.5.8 Delete Rung
The easy800 device only removes empty rungs (without contacts or coils).
▶ Delete all contacts and coils from the rung.
▶ Position the cursor on the first contact field of the empty rung.
▶ Press DEL.
The subsequent rung(s) will be “pulled up” and any existing links between
rungs will be retained.
4.5.9 Got to a rung
The GO TO function can be used to go to a different rung.
▶ Press ESC and use cursor buttons
ÍÚ to select the GO TO menu.
▶ Press OK.
▶ Select the required rung (L…) with the ÍÚ cursor buttons.
Always the first contact of the rung is displayed.
▶ Press OK.
The cursor stops at the first contact L 1 of the required rung.
4.5.10 Saving circuit diagrams
▶ Press ESC to save a circuit diagram.
The menu on the left appears in the status line.
▶ Pressing OK will save the entire program, circuit diagram and function
blocks.
After saving, you will be returned to the previous menu from which you have
opened the circuit diagram.
To Next Page
Loading...
