2 Installation
2.2 Mounting the expansion unit
22 Control Relay easy800 11/11 MN04902001Z-EN www.eaton.com
2.2 Mounting the expansion unit
To increase the number of inputs/outputs, you can connect an expansion unit
via the easyLink connection of the easy800 standard. easy800-SWD devices
are not provided with an easyLink terminal.
Fit the expansion units in exactly the same way as a basic device on the
top-hat rail or by screwing on fixing brackets.
Figure 10:Top-hat rail mounting
Figure 8: Screw fixingeasy800 standard Figure 9: Screw fixing easy800-SWD
M4
1
2
To Next Page
Loading...
