2 Installation
2.2 Mounting the expansion unit
Control Relay easy800 11/11 MN04902001Z-EN www.eaton.com 23
Figure 11:Screw fixing
Locally and remotely connected expansion units have a different connection.
Local expansion module
Local expansion modules are connected directly next to the easy800
standard with easyLink connection.
▶ Connect the easy expansion unit via the EASY-LINK-DS bus connector
plug.
Figure 12:Connecting local expansion module with easy800 standard
The following electrical isolation is implemented between the easy800
standard and the expansion unit (isolation always in the local terminal of the
expansion unit):
• Basic isolation 400 V AC (+10 %).
• Safe isolation 240 V AC (+10 %).
EASY2..-… EASY4..-…, EASY6..-…
￫
easy800 standard and expansion unit can be provided with
different DC power supplies.
To Next Page
Loading...
