5 Function blocks
5.10 CP, comparator
180 Control Relay easy800 11/11 MN04902001Z-EN www.eaton.com
• Analog output QA01.
• Output …QV of a different function block.
Function of the function block
The function block compares values present at the inputs I1 and I2.
The following contacts close depending on the comparison result:
• I1 greater than I2, GT contact closes.
• I1 equal to I2, EQ contact closes.
• I1 less than I2, LT contact closes.
Memory
32 + per 4 Byte/Constant at function block input
Cycle time [μs]
easy800 standard easy800-SWD
24 8
To Next Page
Loading...
