5 Function blocks
5.28 SC, set date/time
242 Control Relay easy800 11/11 MN04902001Z-EN www.eaton.com
Function of the function block
If the trigger coil of the function block is activated, the current date, the day
of the week and time from the sending station is automatically put onto the
easyNet network. The sending stations executes this operation as soon as a
new minute starts on the device real-time clock. The other stations accept
this value.
Example
The trigger pulse is set at 03:32:21 (hh:mm:ss). The other stations are
synchronized at 03:33:00. The time is accepted by all stations. The procedure
can be repeated as often as required.
Accuracy of time synchronization
The maximum time deviation between the functional stations is 5 s.
Memory
20 Byte
Cycle time [μs]
easy800 standard easy800-SWD
23 8
To Next Page
Loading...
