Eaton easyE4

6. Function blocks
6.1 Manufacturer function blocks
Other
Retention
The function block does not recognize retentive data.
User example
The trigger pulse is set at 03:32:21 (hh:mm:ss). The other stations are synchronized at
03:33:00. The time is accepted by all stations.
See also
 → Section "Setting up a NET group", page 706
 → Section "GT - Get values from NET", page 452
 → Section "PT - Put values to NET", page 457
464
easyE402/24 MN050009ENEaton.com