2044 Info Input AC current sensor not
calibrated
Input AC current sensor calibrated -
2045 Info Battery current sensor not
calibrated
Battery current sensor calibrated -
2059 Info Utility AC not present Utility AC present -
2063 Info Internal communication failure Internal communication OK -
2121 Info Parallel UPS internal failure Parallel UPS OK -
2130 Info Charger current too high Charger current OK -
2135 Info Charger not synchronized with
input phase
Charger synchronized with input phase -
2168 Info Battery discharging UPS battery no longer discharging -
2185 Info Automatic bypass breaker
should be closed
Automatic bypass breaker closed -
2196 Info On AVR (Buck) End of AVR (Buck) -
2197 Info On AVR (Boost) End of AVR (Boost) -
2202 Info Ambient temperature is too
Low
Ambient temperature is OK -
2204 Info Door or cover of the UPS open Door or cover of the UPS closed -
2211 Info Modem connection fault Modem connection OK -
2227 Info On high efficiency or ESS No longer on High efficiency or ESS -
2228 Info At least one informational alarm
active
No informational alarms active -
2247 Info Battery breaker should be
closed
Battery breaker closed -
2370 Info Building alarm 7 Building alarm 7 OK -
2371 Info Building alarm 8 Building alarm 8 OK -
2372 Info Building alarm 9 Building alarm 9 OK -
2383 Info Condition in the device to call
user
No longer condition in the device to call
user
-
2385 Info Service scheduled Service no longer scheduled -
To Next Page
Loading...
