Eaton Network-MS - System Settings

www.eaton.com
Network
Management Card
(Network-MS)
User Manual
Network Management Card – User Manual 34003991XT_EN/JC Page 106/143
bit2 = 1 : MIB IETF enabled
6.4.4 System settings
6.4.4.1 “getSystem”
Purpose To read a system setting
Syntax getSystem [option1] [option2]...
options :
Contact
Location
upsCustomName
Language
Examples #> getSystem Location
Comments
6.4.4.2 “setSystem”
Purpose To modify a system setting
Syntax setSystem [option1] [option2]...
options :
Contact = “xx..xx”
Location = “xx..xx”
upsCustomName = “xx..xx”
Language = AUTO|FRE|ENG|SPA|GER|ITA|CHI|CHT|
JPN|KOR|CZI|RUS|POR
Examples #> setSystem Location=”my office”
Comments
6.4.4.3 “getHistSyst”
Purpose To read a history system setting
Syntax getHistSyst [option]
options :
Interval
Examples #> getHistSyst Interval
Comments
6.4.4.4 “setHistSyst”
Purpose To modify a history system setting
Syntax setHistSyst [option]
options :
Interval = xx (10..2147483647 in s)