Eaton Network-MS - Shutdown Settings

www.eaton.com
Network
Management Card
(Network-MS)
User Manual
Network Management Card – User Manual 34003991XT_EN/JC Page 107/143
Examples #> setHistSyst Interval=12
Comments
6.4.4.5 “getEnvSyst”
Purpose To read a environment system setting
Syntax getEnvSyst [option1] [option2]
options :
Interval
Delimiter
Examples #> getEnvSyst Delimiter
Comments
6.4.4.6 “setEnvSyst”
Purpose To modify a environment system setting
Syntax setEnvSyst [option1] [option2]
options :
Interval = xx (10..2147483647 in s)
Delimiter = Comma|Tab
Examples #> setEnvSyst Delimiter = Comma
Comments
6.4.5 Shutdown settings
6.4.5.1 “getShutdown”
Purpose To read a shutdown setting
Syntax getShutdown N [option1] [option2] ...
N = 1|2|3
options for N=1:
iName
RunTimeToEmptyLimit
RemainingCapacityLimit
ShutdownTimerSelected
ShutdownTimer
ShutdownDuration
RestartLevel
options for N=2 or 3:
iName
ShutdownTimer
RemainingCapacityLimit
ShutdownDuration