Eaton Network-MS - Authentication Settings

www.eaton.com
Network
Management Card
(Network-MS)
User Manual
Network Management Card – User Manual 34003991XT_EN/JC Page 109/143
options :
Login = “xx..xx”
Password = “**..**”
(1)(2)
ConfirmPass = “**..**”
(1)(2)
Security = 1|2|3 (1=conf., 2=full auth.,
3=full auth. & SSL)
Examples #> setAccess Security=3
Comments
(1)
: Don’t forget to set echo off
(2)
: The 2 passwords entered must be the same for to be taken into account
6.4.6.3 “getTelnet”
Purpose To read a Telnet setting
Syntax getTelnet [option1] [option2]...
options :
Access
Security
Console
Examples #> getTelnet Security
Comments
6.4.6.4 “setTelnet”
Purpose To modify a Telnet setting
Syntax setTelnet [option1] [option2]
options :
Access = 0|1 (0=Disabled, 1=Enabled)
Security = 0|1 (0=No, 1=Yes with SSH)
Console = CLI|Menu
Examples #> setTelnet Security=0
Comments
6.4.7 Authentication settings
6.4.7.1 ”getAuth”
Purpose To read an Authentication setting
Syntax syntax: getAuth [options...]
options :
SessionTime
MaxSessionTime
AuthOrder
AuthMethod