Eaton Network-MS - Default Parameters

www.eaton.com
Network
Management Card
(Network-MS)
User Manual
Network Management Card – User Manual 34003991XT_EN/JC Page 15/143
1.3.8 Default parameters
Function Parameter Default value Possible value
Network IP address 192.168.1.2 Network IP address
Subnet mask 255.255.0.0 Network IP address
Gateway Address 0.0.0.0 Network IP address
BOOTP/DHCP Enabled Active / Deactivated
IPv6 Enabled Disabled Active / Deactivated
IPv6 Auto Config Enabled Disabled Active / Deactivated
Firmware Upload Enabled Active / Deactivated
SMTP server
Port
smtpserver
25
49 characters maximum
1 to 65535
RADIUS Port
Time Out
Retry Number
1812
10
3
1 to 65535
1 to 9999
1 to 9999
LDAP Authentication Mechanism
User Search
Authorization Mode
Port
Simple
Anonymous
None
389
Simple or by digest MD5
Anonymous or by a dedicated
LDAP user
None/by attribute/by group
1 to 65535
System UPS Contact Computer Room Manager 49 characters maximum
UPS Location Computer Room 31 characters maximum
History log interval (sec.) 60 10 to 99999 sec.
Environment log interval (sec.) 300 10 to 99999 sec.
Default Language English English / French / Spanish /
German / Italian / Chinese
Traditional / Chinese
Simplified / Japanese /
Portuguese / Russian /
Korean / Czech
Notified Application table empty NA
Acces control User name admin 10 characters maximum
Password admin 10 characters maximum
Telnet access enabled Enabled Enabled/Disabled
Telnet security enabled Disabled Enabled/Disabled
Console interface
External Authentication
Authentication Order
Session duration without activity
Maximum sessions duration
Menu
None
Local First, then External
300 seconds
9999 seconds
Menu/CLI