Eaton Network-MS - Environment Settings

www.eaton.com
Network
Management Card
(Network-MS)
User Manual
Network Management Card – User Manual 34003991XT_EN/JC Page 114/143
Time
TimeSync
TimeNtp
TimeZone
TimeDaylight
Examples #> getDate timeSync
Comments
6.4.8.2 “setDate”
Purpose To modify a date and time setting
Syntax setDate [option1] [option2]...
options :
Date = yyyy/mm/dd
(1)
Time = hh:mm:ss
(1)
TimeSync = MANUAL|AUTO|NTP
TimeNtp = “xx..xx”
TimeZone = +/-hh:mm
(2)
TimeDaylight = 0|1 (0=No, 1=Yes)
Examples #> setDate TimeSync=MANUAL
Comments
(1)
: Writing enabled according to “TimeSync” status
(2)
: The smallest granularity is half an hour; for a bad value, the nearest value is taken
into account
6.4.9 Environment settings
6.4.9.1 “getEnv”
Purpose To read an environment setting
Syntax getEnv [option1]
options :
Name
Examples #> getEnv Name
Comments
6.4.9.2 “setEnv”
Purpose To modify an environment setting
Syntax setEnv [option1]
options :
Name = “xx..xx”
Examples #> setEnv Name=”sensor”
Comments