Eaton Network-MS - User Manual

www.eaton.com
Network
Management Card
(Network-MS)
User Manual
Network Management Card – User Manual 34003991XT_EN/JC Page 9/143
1.1.4.1 How to connect UPS / agent / network:
Insert the optional NMC communication card in the UPS and connect the UPS to the computer network.
Start the UPS, then the computers.
1.1.4.2 Setting up the protection:
Set up the Network Management Card (see user manual).
Install and configure the protection application on all machines that are to be protected by the UPS:
• Intelligent Power Protector for EATON Pulsar series UPS: The software components for each platform
and the user manuals are on the Software Suite CD or available at http://powerquality.eaton.com