Eaton Network-MS - Access Control Settings

www.eaton.com
Network
Management Card
(Network-MS)
User Manual
Network Management Card – User Manual 34003991XT_EN/JC Page 108/143
StartupTimer
Examples #> getShutdown 1 ShutdownDuration
Comments
6.4.5.2 “setShutdown”
Purpose To modify a shutdown setting
Syntax setShutdown N [option1] [option2] ...
N = 1|2|3
options for N=1:
iName = “xx..xx”
RunTimeToEmptyLimit = xx (0..9999 in sec)
RemainingCapacityLimit = xx (0..100 in sec)
ShutdownTimerSelected = 0|1 (0=No, 1=Yes)
ShutdownTimer = xx (0..5999940/60 in min)
ShutdownDuration = xx (0..999 in sec)
RestartLevel = xx (0..100 %)
options for N=2 or 3:
iName = “xx..xx”
ShutdownTimer = xx (99..99999 in sec)
RemainingCapacityLimit = xx (0..100 in sec)
ShutdownDuration = xx (0..999 in sec)
StartupTimer = xx (0..65535 in sec)
Examples #> setShutdown 1 ShutdownDuration=120
Comments
6.4.6 Access control settings
6.4.6.1 “getAccess”
Purpose To read an access control setting
Syntax getAccess [option1] [option2]...
options :
Login
Password
(1)
Security
Examples #> getAccess Login
Comments
(1)
: All characters are replaced with the star character ‘*’
6.4.6.2 “setAccess”
Purpose To modify an access control setting
Syntax setAccess [option1] [option2]