Eaton Network-MS - Authentication Settings; RADIUS Settings; LDAP Settings

www.eaton.com
Network
Management Card
(Network-MS)
User Manual
Network Management Card – User Manual 34003991XT_EN/JC Page 86/143
• Shutdown timer selected
• Shutdown duration
• Battery capacity exceeds
• Outlet 2 & 3:
• Name
• Switch off after
• Remaining capacity limit
• Shutdown duration
• Switch on after
6.2.6 Authentication settings
6.2.7 RADIUS settings
This is the list of Radius Servers. There is a maximum of 2 servers.
The parameter list is the following:
• Radius Server Primary&Secondary:
• Radius Server
• Secret
• NAS IP Address
• Auth. Port
• Time Out
• Retry Number
6.2.8 LDAP settings
This is the list of LDAP Settings.
The parameter list is the following:
• Authentication Mechanism
• User Search Bind
• Search User
• Search User Password
• User Base DN
• User Object
• User Attribute
• Authorization Mode
• UPS Group Base DN
• Group Name Attribute
• User Name Attribute
• LDAP Server Primary&Secondary:
• Server Name