www.eaton.com
Network
Management Card
(Network-MS)
User Manual
Network Management Card
– User Manual 34003991XT_EN/JC
Page
13/143
1.3.4 Administration
• NEW features:
o External User Authentication from RADIUS or LDAP
• Up to 35 workstations (in TCP connected mode) or up to 100(in UDP broadcasted mode) protected by
Intelligent Power Protector.
• Up to 5 browsers connected at the same time (3 in SSL).
• Minimum recommended browser versions: Internet Explorer 8, Mozilla Firefox 3.6, Chrome.
• E-mail sending configurable according to UPS alarms and transmission of a periodical report.
• Control of UPS on/off switching via the HTML interface.
• Adjustment and control of PowerShare outlets via the HTML interface, sequential starting of the
installation and optimisation of backup time by shutting down non-priority systems.
• Automatic data and time adjustment via NTP server.
• Protection by encrypted password.
• Protection by secure SSL connection.
• Backup logs in the non-volatile memory.
• Languages available: English / French/ Spanish / German / Italian / Chinese Traditional / Chinese
Simplified / Japanese / Portuguese / Russian / Korean / Czech.
• On-line help in English available for each page.
• Card firmware update via the network.
• Card Mass settings via the network with Intelligent Power Manager.
• Firmware Mass Upgrade via the network with Intelligent Power Manager.
• Ability to change the SMTP, SNMP and TRAP ports.
1.3.5 Network
Fast ETHERNET 10/100 Mbits compatibility with auto-negotiation on the RJ45 outlet.
Compatible with 1Gbits networks in 100 Mbits mode
1.3.5.1 List of ports used
To Next Page
Loading...
