Eaton Network-MS - Reset Item; Network Menu

www.eaton.com
Network
Management Card
(Network-MS)
User Manual
Network Management Card – User Manual 34003991XT_EN/JC Page 91/143
------------------------------------------------------------------------
NETWORK MANAGEMENT CARD
Main menu
------------------------------------------------------------------------
1 : Reset
2 : Network settings
3 : Trap receivers
4 : System settings
5 : Shutdown settings
6 : Access control
7 : Date and Time
8 : Environment settings
9 : Item not available
10 : Authentication settings
11 : Set login password to default
12 : Default configuration
Quit : Close session
------------------------------------------------------------------------
6.3.3 Reset item
This menu item is used to reset the card. It is not possible to reset the card when a flash write process is in
progress. When a reset operation is completed, a prompt is displayed to confirm the reset.
6.3.4 Network menu
This menu is used to view or modify the network settings.