Eaton Network-MS - Choice 3: Lost Password; Set Login Password to Default

www.eaton.com
Network
Management Card
(Network-MS)
User Manual
Network Management Card – User Manual 34003991XT_EN/JC Page 121/143
7.3 Choice 3: Lost password / Set Login Password to Default
In the even the login or password is lost, choice 3 enables the return to the default password:
-----------------------------------------------------------------------------
EATON
NETWORK MANAGEMENT CARD
-----------------------------------------------------------------------------
1 : Reset
2 : Network configuration
3 : Set Login Password to Default
4 : Return to Default Configuration
0 : Exit
-----------------------------------------------------------------------------
Wait during Login Password return to default ...
Wait for the confirmation message.
Login & Password have been successfully set.
The card is now accessible via the Web with the password admin.
The card must be restarted in order for the new parameters to be taken into account.