Eaton Network-MS - Network Settings

www.eaton.com
Network
Management Card
(Network-MS)
User Manual
Network Management Card – User Manual 34003991XT_EN/JC Page 102/143
6.4.1.6 “defaultPass”
Purpose Returns to default Login/Password
Syntax defaultPass
Examples #> defaultPass
6.4.1.7 “defaultConf”
Purpose Returns to default Configuration
Syntax defaultConf
Examples #> defaultConf
Comments The card is automatically reset.
6.4.2 Network settings
6.4.2.1 “getNetwork”
Purpose To read a network setting
Syntax getNetwork [option1] [option2]...
options :
DHCP
IPAddress
IPMask
IPGateway
HostName
DomainName
IPv6Enable
IPv6AutoConf
IPv6Address1
IPv6DefaultGateway
IPv6LocalAddress
IPv6Address2
PrimaryDNS
SecondaryDNS
FirmwareUpgrade
Examples #> getNetwork IPAddress
6.4.2.2 “setNetwork”
Purpose To modify a network setting
Syntax setNetwork [option1=xxxx] [option2=yyyy]...
options :
DHCP = 0|1 (0=No, 1=Yes)
IPAddress = “xxx.xxx.xxx.xxx”
(1)