Eaton Network-MS - Page 110

www.eaton.com
Network
Management Card
(Network-MS)
User Manual
Network Management Card – User Manual 34003991XT_EN/JC Page 110/143
Examples #> getAuth SessionTime
Comments
6.4.7.2 “setAuth”
Purpose To modify an Authentication setting
Syntax syntax: setAuth [options...]
options:
SessionTime=xx <-- in sec. 1..9999 -->
MaxSessionTime=xx <-- in sec. 1..9999 -->
AuthOrder=Local_Only|Local_External|External_Local|External_Only
(1)
AuthMethod=LOCAL|RADIUS|LDAP
Examples #> setAuth SessionTime =200
Comments
(1)
: Writing enabled according to “AuthMethod” status
6.4.7.3 ”getRadPrimSrv”
Purpose To read an Radius primary server setting
Syntax syntax: getRadPrimSrv [options...]
options:
Server Enable <-- 0=No, 1=Yes -->
Server ServerName
Server SharedSecret
Server Port
Server NasIdentiferType
Server Retry
Server Timeout
Examples #> getRadPrimSrv Port
Comments
6.4.7.4 “setRadPrimSrv”
Purpose To modify an Radius primary server setting
Syntax syntax: setRadPrimSrv [options...]
options:
Server Enable <-- 0=No, 1=Yes -->
(1)
Server ServerName="Server Name"
(1) (2)
Server SharedSecret="Shared Secret"
(1) (2)
Server Port=xx <-- 1..65535 -->
(1) (2)
Server NasIdentiferType=IPV4|IPV6_1|IPV6_2|IPV6_LOCAL
(1) (2)
Server Retry=xx <-- 1..9999 -->
(1) (2)
Server Timeout=xx <-- 1..9999 -->
(1) (2)
Examples #> setRadPrimSrv Port =1812