Eaton Network-MS - Page 111

www.eaton.com
Network
Management Card
(Network-MS)
User Manual
Network Management Card – User Manual 34003991XT_EN/JC Page 111/143
Comments
(1)
: Writing enabled according to “AuthMethod” status
(2)
: Writing enabled according to “Enable” status
6.4.7.5 ”getRadSecondSrv”
Purpose To read an Radius secondary server setting
Syntax syntax: getRadSecondSrv [options...]
options:
Server Enable <-- 0=No, 1=Yes -->
Server ServerName
Server SharedSecret
Server Port
Server NasIdentiferType
Server Retry
Server Timeout
Examples #> getRadSecondSrvPort
Comments
6.4.7.6 “setRadSecondSrv”
Purpose To modify an Radius secondary server setting
(1)
Syntax syntax: setRadSecondSrv [options...]
options:
Server Enable <-- 0=No, 1=Yes -->
(1)
Server ServerName="Server Name"
(1) (2)
Server SharedSecret="Shared Secret"
(1) (2)
Server Port=xx <-- 1..65535 -->
(1) (2)
Server NasIdentiferType=IPV4|IPV6_1|IPV6_2|IPV6_LOCAL
(1) (2)
Server Retry=xx <-- 1..9999 -->
(1) (2)
Server Timeout=xx <-- 1..9999 -->
(1) (2)
Examples #> setRadSecondSrv Port =1812
Comments
(1)
: Writing enabled according to “AuthMethod” status
(2)
: Writing enabled according to “Enable” status
6.4.7.7 ”getLDAPPrimSrv”
Purpose To read an LDAP primary server setting
Syntax syntax: getLDAPPrimSrv [options...]
options:
Enable <-- 0=No, 1=Yes -->
ServerName
Port
Examples #> getLDAPPrimSrv Port