Eaton Network-MS - Page 112

www.eaton.com
Network
Management Card
(Network-MS)
User Manual
Network Management Card – User Manual 34003991XT_EN/JC Page 112/143
Comments
6.4.7.8 “setLDAPPrimSrv”
Purpose To modify an LDAP primary server setting
Syntax syntax: setLDAPPrimSrv [options...]
options:
Enable <-- 0=No, 1=Yes -->
(1)
ServerName="Server Name"
(1) (2)
Port=xx <-- 1..65535 -->
(1) (2)
Examples #> setLDAPPrimSrv Port =389
Comments
(1)
: Writing enabled according to “AuthMethod” status
(2)
: Writing enabled according to “Enable” status
6.4.7.9 ”getLDAPSecondSrv”
Purpose To read an LDAP secondary server setting
Syntax syntax: getLDAPSecondSrv [options...]
options:
Enable <-- 0=No, 1=Yes -->
ServerName
Port
Examples #> getLDAPSecondSrv Port
Comments
6.4.7.10 “setLDAPSecondSrv”
Purpose To modify an LDAP secondary server setting
Syntax syntax: setLDAPSecondSrv [options...]
options:
Enable <-- 0=No, 1=Yes -->
(1)
ServerName="Server Name"
(1) (2)
Port=xx <-- 1..65535 -->
(1) (2)
Examples #> setLDAPSecondSrv Port =389
Comments
(1)
: Writing enabled according to “AuthMethod” status
(2)
: Writing enabled according to “Enable” status
6.4.7.11 ”getLDAPSearch”
Purpose To read the Search LDAP setting
Syntax syntax: getLDAPSearch [options...]
options:
AuthMechanism
SearchMode