Eaton Network-MS - Page 133

www.eaton.com
Network
Management Card
(Network-MS)
User Manual
Network Management Card – User Manual 34003991XT_EN/JC Page 133/143
This table lists objects that are managed if there is an optional Sensor / Environmental
Monitoring Probe (EMP) installed. The Eaton Pulsar MIB access path is
1.3.6.1.4.1.705.1.
upsmgEnvironAmbientTemp 0.1 degré {8.1.0}
upsmgEnvironAmbientHumidity 0.1 % {8.2.0}
upsmgEnvironmentNum {8.6.0}
upsmgEnvironmentIndex {8.7.1.1.1}
upsmgEnvironmentComFailure 1(yes) 2(no) {8.7.1.2.1}
upsmgEnvironmentTemperature 0.1 degré {8.7.1.3.1}
upsmgEnvironmentTemperatureL
ow
1(yes) 2(no) {8.7.1.4.1}
upsmgEnvironmentTemperature
High
1(yes) 2(no) {8.7.1.5.1}
upsmgEnvironmentHumidity 0.1 % {8.7.1.6.1}
upsmgEnvironmentHumidityLow 1(yes) 2(no) {8.7.1.7.1}
upsmgEnvironmentHumidityHigh 1(yes) 2(no) {8.7.1.8.1}
upsmgEnvironmentInput1State closed(1), open(2) {8.7.1.9.1}
upsmgEnvironmentInput2State closed(1), open(2) {8.7.1.10.1}