Eaton Network-MS - Page 3

www.eaton.com
Network
Management Card
(Network-MS)
User Manual
Network Management Card – User Manual 34003991XT_EN/JC Page 3/143
4.2.2
On-line help 37
4.2.3 Logging In 38
4.2.4 UPS control 39
4.2.5 UPS weekly schedule programming 41
4.2.6 Shutdown parameters 42
4.2.7 Measurements 44
4.2.8 Event log 45
4.2.9 System log 46
4.3 N OTIFICATION 47
4.3.1 Email Notification 47
4.3.2 E-mail Message Settings 49
4.4 C ONFIGURATION 51
4.4.1 Network settings 51
4.4.2 RADIUS 54
4.4.3 LDAP 56
4.4.4 System 59
4.4.5 Notified Applications 60
4.4.6 Central shutdown configuration 63
4.4.7 Access control 64
4.4.8 SNMP Setting 66
4.4.9 Date and time 68
4.4.10 Firmware upload 70
4.5 E NVIRONMENT S ENSOR ( OPTION ) 71
4.5.1 Characteristics 71
4.5.2 Environment Status 72
4.5.3 Environment Settings 73
4.5.4 Log 75
5 SERVER PROTECTION 76
5.1 S ET - UP OF THE SHUTDOWN PARAMETERS 76
5.1.1 Shutdown criteria managed by the Network Management Card 76
5.1.2 Controlled outlets 79
5.1.3 Protection of a server connected to a controlled outlet 79
5.2 T HE DIFFERENT SERVER AND UPS SHUTDOWN SEQUENCES 81
5.2.1 Extended power outage, shutdown initiated by the Shutdown Timer (Shutdown after) 81
5.2.2 Extended power outage, shutdown initiated by the "Low battery power" message 81
5.2.3 Case of power restoration before the end of the "shutdown duration" counter 82
5.3 S HUTDOWN MANAGEMENT WITH 2 NMC BOARDS 83
5.3.1 Shutdown Duration 83
5.3.2 Settings 83
6 TELNET/SSH/CLI INTERFACES 84