Eaton Network-MS - Page 40

www.eaton.com
Network
Management Card
(Network-MS)
User Manual
Network Management Card – User Manual 34003991XT_EN/JC Page 40/143
• Immediate On: A sequence to switch on output power is launched immediately. The output is re-
powered and the systems supplied start up correctly.
• Delayed, safe power down: This is the same switch off sequence as for the "Safe power down"
command, but postponed by the number of seconds programmed in the "Off Delay" parameter.
• Delayed, safe power down & reboot: This is the same switch off then on sequence as for the "Safe
power down & reboot" command, but postponed by the number of seconds programmed in the "Off
Delay" parameter.
• Delayed On: This is the same switch on sequence as for the "Immediate On" command, but postponed
by the number of seconds programmed in the "On Delay" parameter.
The Save button saves the Off Delay, Toggle duration and On Delay parameters on the card.