Eaton Network-MS - Page 67

www.eaton.com
Network
Management Card
(Network-MS)
User Manual
Network Management Card – User Manual 34003991XT_EN/JC Page 67/143
• Auth No Priv: the user must use authentication and NOT privacy to access to SNMP variables.
• Auth Priv: the user must use authentication and privacy to access to SNMP variables.
• The Read-Only Authentication Password: allows administrator to specify a new authentication
password for the Read-Only User. Its length must be ranging between 8 and 24 characters and using
only letters, numbers and <>&@#%_=:;,./?|$*()-~ symbols.
• The Read-Only Privacy Password: allows administrator to specify a new privacy password for the
Read-Only User. Its length must be ranging between 8 and 24 characters and using only letters,
numbers and <>&@#%_=:;,./?|$*()-~ symbols.
• The Read-Write User: identifies the user in the SNMPv3 version which is authorized to read and write
SNMP variables.
• The Read-Write Security Level: selects the security level:
• No Auth No Priv: the user must not use authentication and privacy to access to SNMP variables.
• Auth No Priv: the user must use authentication and NOT privacy to access to SNMP variables.
• Auth Priv: the user must use authentication and privacy to access to SNMP variables.
• The Read-Write Authentication Password: allows administrator to specify a new authentication
password for the Read-Write User. Its length must be ranging between 8 and 24 characters and using
only letters, numbers and <>&@#%_=:;,./?|$*()-~ symbols.
• The Read-Write Privacy Password: allows administrator to specify a new privacy password for the
Read-Write User. Its length must be ranging between 8 and 24 characters and using only letters,
numbers and <>&@#%_=:;,./?|$*()-~ symbols.
• The Notification username: allows administrator to specify the “username” field for SNMPV3
notifications. This field has to also be defined in the applications that received those notifications.
• Save: Saves any modifications.