www.eaton.com
Network
Management Card
(Network-MS)
User Manual
Network Management Card
– User Manual 34003991XT_EN/JC
Page
69/143
1. Select the Week number, Day, Month, and Time for which daylight saving time should start. For
example, if daylight saving time starts the second Sunday of March at 2:00 am, select Second Sunday
and March, and then enter 02:00.
2. Select the Week number, Day, Month, and Time for which daylight saving time should end. For
example, if daylight saving time ends the first Sunday of November at 3:00 am, select First Sunday, and
November, and then enter 03:00
Note 1:
The even the card is used in a UPS supporting time-stamping, the card's time is automatically synchronized with
that of the UPS.
Note 2:
After start-up, if the card is in manual mode or if no NTP server was reached, the card initializes at
01/01/1970.
To Next Page
