Decommissioning and disposal
113
Version 2.09 09. April 2014
9 Decommissioning and disposal
9.1 Decommissioning / Demounting
The disassembly of the equipment is only to be carried out by trained and authorised personnel.
Warning - hazardous electrical voltage!
Danger of electric shock! During disassembly the same safety instructions and hazard warnings
are to be observed as in the case of installation, commissioning and maintenance,
see chapter 1, ”Industrial safety notes”.
During disassembly the reverse procedure is to be observed as that during assembly,
see chapter ”Installation and Startup”.
9.2 Disposal
The scope of our delivery is designated as a component exclusively for further processing.
As a consequence of this fact, Eckelmann AG does not undertake any measures for the taking back or munici
pal recycling of this product as it is not supplied directly to the free market.
Never dispose of this product with other household waste. Please inform yourself of the local regula
tions for the separate disposal of electrical and electronic products. The correct disposal of your old
equipment will protect people and the environment from possible negative effects.
The provisions and regulations for the disposal of the equipment are to be observed.
In accordance with the contractual agreement, the customer is beholden to dispose of electrical and
electronic waste in compliance with the statutory regulations based on the Directive 2002/96/EC on
waste electrical and electronic equipment.
To Next Page
Loading...