ECKELMANN CI 3000 - Remote Alarm Messaging

Function of CI 3000
17
Version 2.09 09. April 2014
4.1.2 Remote alarm messaging
16 alarm destinations are available for remote alarm messaging. The destinations can be:
S A PC with the PC software LDSWin
S An SMS recipient
S FAX machine and
S A telephone for the receipt of a voice message
With SMS message transmission the telephone number of the SMS provider must be activated in
the telephone system otherwise no SMS transmission is possible:
D1: 0171-20 92 522 0171-25 21 002
D2: 0172-22 78 020
Anny Way: 0900-32 66 90 02
EASY mode
The alarm destinations 1..4 are predominately pre-defined and should be sufficient for the majority of applica
tions. They largely correspond to the remote alarm messaging concept of older store computer versions with
firmware versions <5.0.
The alarm destinations of the EASY mode are:
1. The control centre as primary destination (LDSWin PC)
2. Fault clearing service as primary destination or alternative to control centre (LDSWin PC)
3. SMS via the service provider Anny Way
4. Voice message
The following settings (see menu items 6-1-4-4-1 to 6-1-4-4-4) are available for the EASY mode alarm destina
tions:
- Entering the destination telephone number
- Which priorities are to be registered: 1or 2 or 1+2
- Whether messages are to be sent inside or outside a specifiable time period or at all times
Extended alarm destinations
The alarm destinations 5..16 can be freely configured and can be assigned to destinations as required (also
multiple). Information on the extended alarm destinations (5..16) and their function are described in greater de
tail in chapter 4.1.2.2.