Menu structure of CI 3000
73
Version 2.09 09. April 2014
8.1.1 Menu Main menu
MAIN MENU
1 Alarms Alarm log. Continue to Screen 1
2 Overview Overview of refrigeration points
3 Archive EU archive data
4 Messages Message log
5 Remote Control Remote operation of LDS components
6 Store Computer Store Computer configuration menu
7 Monitoring Configuration of monitoring functions
8 I/O Monitor Diagnostic tools for service use
9 Parameters Store Computer parameter setting
0 HVAC Overview HVAC overview
8.1.2 Menu 1 Alarms
This screen is used to show the alarm log. It contains all alarms reported throughout the system by all
LDS components connected via CAN bus. It also contains alarms generated by the CI 3000 Store Computer
and external alarms connected to the CI 3000.
Alarms remain listed in the log until they are reported as corrected and reset by the user. If an LDS component
reports an alarm while the CI 3000 Store Computer main menu is displayed, the menu changes automatically to
show the alarm log and the most recent alarm received.
Use the cursor keys (←) and (→) to change between the two pages.
Display Page 1
ALARM XXX Prio p Heading with Alarm No. and alarm priority p ( p = 0 to 2 )
Node Name Name of alarm-generating component
Item ID XXXXX →
Item ID of alarm-generating component. Move to Screen 1-a
Text Real language / Alarm text
To Next Page
Loading...