Menu structure of CI 3000
107
Version 2.09 09. April 2014
8.1.10 Menu 9 Parameters
Entry screen to access submenus for date/time, user language and cancelling entry block for LDS components.
PARAMETERS
1 Date/Time Configure date and time
2 Language Select user language in complete LDS System
3 Interlock Cancel entry block
S Screen 9-1 Date/Time
This screen is used to specify the date and time for all LDS components. Note that the day of the date cannot
be changed.
DATE/TIME Entry Default
Date: Mo 19.12.05 Enter current date ↑, ↓, number Date
Time: 14:36 Enter current time ↑, ↓, number Time
Daylight Saving Y Auto adjust daylight saving toggles between automatic adjust
ment for daylight saving change on (Y) or off (N).
↑, ↓, (Y/N) Y
Change of date is blocked for protection of archiving (see Screen 9-3 for cancelling block).
Time can only be adjusted up or down in increments of 15 minutes.
Changing the date may result in loss of correlation between recorded operating data (EU archives,
etc.) and the actual time stamp!
S Screen 9-2 Language
This screen is used to change the user language for the complete system during operation. The selected lan
guage is indicated by a check mark. Use the up and down cursor keys (↑) (↓) to select the language wanted
and confirm by pressing the ENTER key.
LANGUAGE Entry Default
Deutsch D √ √ = Select language ↵ √
English GB
Francais F
Espagnol E ↵
Finnish FIN ↵
Türkce TR
CeskyCZ
If an LDS component installed in the system does not support the selected language, it will change
to the default language, English.
To Next Page
Loading...