H50/H51 Hematology Analyzer User Manual Reagents Management
- 21 -
Chapter 5 Software Introduction
5.1 Toolbar Introduction
All menus and sub-menus are displayed with the same toolbar as described below.
PREVIOUS: Allow to return to the previous screen except when the system in under the
Main Screen.
TOOLS: Depending on the screen, you can access to some of the following options.
To send results data to the host computer
To print data To delete data
To save data To cancel the pop-out
MENU: Allow to return to Main Sc
reen except when the system in under the Main Screen.
ABOUT: Allow accessing to the following screen to know about the analyzer’s information.
5.2 Common Buttons Introduction
The following buttons often appear in different screens but they have the same functions.
Therefore, these buttons and their functions are listed here only once. When the software screens
are detailed in other chapters, these buttons’ functions will not repeated.
Move to the top of the table
Move up in the table step by step
Move down in the table
Move to the bottom of the table
Validate changes
Cancel changes
Move to the left of the table
Move to the left step by step
Move to the right of the table
Move to the right step by step
On/Off Button is red, the current cycle is
On/Off Button is green, a new cycle can be started.