EDAN H50 - Chapter 6 Reagents Management; Reagent Management: Diluent, Lyse, Cleaner

H50/H51 Hematology Analyzer User Manual Reagents Management
- 23 -
Chapter 6 Reagents Management
6.1 Diluent/ Lyse/Cleaner Management
Procedures for Diluent management are as follows:
1) Press Reagents to enter into Screen 5-1.
2) Press Diluent to enter into Screen 5-2.
3) Enter Diluent’s lot, expiry, capacity, serial and code in Screen 5-2.
4) Press to finish Diluent’s management and return to Screen 5-1.
5) Press Prime to prime diluent.
NOTE:
9 Procedures for Cleaner and Lyse management are identical with procedures of
Diluent’s management.
9 When the three regents are installed simultaneously, Prime All is required.
9 All reagents including cleaner, diluent and lyse supplied by EDAN are cyanide-free.

Screen 5-1 Screen 5-2
t