EDAN H50 - Printer Setting

H50/H51 Hematology Analyzer User Manual Service
- 51 -
13.5.4 Printer Setting
 Printer Management
1) Connect printer to the analyzer as instructions in printer’s user manual.
2) Press Printer Management to enter into Screen12-3.The connected printer’s information
will be displayed.
3) Click “Not Installed” and Screen 12-4 will displayed. Press
and Screen 12-5 will pop
out.
4) Select the targeted printer’s name and Press
to finish the printer’s management.
5) Press
and a new Setup window will pop out as Screen
12-6 shows. With this Setup window, you can:
Screen 12-6
Screen 12-3
Screen 12-4
Screen 12-5
1)
Press
to delete the installed printer.
2)
Press to print a test page.
3)
Press
to set the printer as a default one.
4)
Press to pause or resume printing.
5)
Press to empty the printing list.
6)
Press to close the Setup window.