EDAN H50 - System Alerts and Messages

H50/H51 Hematology Analyzer User Manual Test Results
- 37 -
12.2 System Alerts
 
Table 11-1
System Alerts
Detailed information in
pop-out window
Triggers
S-
UP Failed
Startup Failed
Background test results don’t meet
background requirements.
INS-T
Instrument temperature out
of range
Means that the Instrument temperature is
lower than 1
8°C or higher than 32
°C and the
test
results may be affected.
QC NOT DONE
QC Not Done During the
Day
QC
tests are not done during the day.
QC FAILED
QC Failed on last run
The last QC
test failed.
RBC
Clog
RBC Aperture Clog
Clog detected during RBC or PLT
measurement (aperture clog).
WBC
Clog
WBC Aperture Clog
Clog detected during WBC measurement
(aperture clog).
WBC-
BAL
WBC Balance
Unbalanced counting between the resistive
and the optical measurement on the WBC
Channel. This may be explained by a clog on
the WBC aperture, a clog on the WBC flow
cell or that the stop cock has been left as
closed.
NOTE:
It will trigger an automatic rinsing cycle
called
“APERTURES RINSING”
The system alerts have the corresponding
abbreviations. The abbreviations are
displayed in the flag box. Press the
abbreviations, an enlarged
flag box
will
pop out to display its detailed information
as the left Screen shows.
The following Table 11
-1 lists
all the
system alerts and its corresponding
abbreviations.