EDAN H50 - Chapter 12 Flags; Results Flags Interpretation

H50/H51 Hematology Analyzer User Manual Test Results
- 36 -
Chapter 12 Flags
12.1 Results Flags
Results flags are directly displayed behind the test values and they will be printed out together
with the test results. The following table lists all results flags which may appear on the test results.
Symbol
Interpretation Note
*
Inconsistent data between count periods
R
esult is displayed in
bold
+
The test result is above the linearity range but within
the measurement range.
R
esult is displayed in
bold
++++
The
measured result is above
the measurement range.
Result is replaced by ++++

An alarm is associated with the parameter and the
ala
rm is displayed in the flag box.
Result is displayed in italic.
H/h/L/l
T
he test result
is above or below the corresponding
“R
eference Ranges” as the
Reference Ranges Screen
in
Section 12.5.1.5 Reference Ranges shows.
h or l
:
result is colored in
light orange
H or L
:
result is colored in
red
Results flags are
displayed behind the
test values.
This is the flag box.
The system alerts and
the morphological
alarms are displayed
in the flag box.
These histograms and
scattergram
can be
enlarged respectively
by pressing them.