– 18 –
1 Introduction
The access point (AP) runs software that includes a network management agent.
The agent offers a variety of management options, including a web-based
interface. The AP can also be accessed through Secure Shell (SSH) for
configuration using a command line interface (CLI).
Note:
This manual describes the configuration interface for stand-alone mode.
Refer to the Edgecore ecCLOUD Controller User Manua
l for information on
configuring the AP through the cloud interface.
This chapter includes the following sections:
“Configuration Options” on page 19
“Connecting to the Web Interface” on page 20
“AP Setup Wizard” on page 21
“QR Code Onboarding” on page 26
“Main Menu” on page 29
To Next Page
Loading...
Need help?
General
