– 3 –
How to Use This Guide
This guide includes detailed information on Edgecore access point (AP) software,
including how to operate and use the management functions of APs. To deploy APs
effectively and ensure trouble-free operation, you should first read the relevant
sections in this guide so that you are familiar with all software features.
Who Should Read
This Guide?
This guide is for network administrators who are responsible for operating and
maintaining network equipment. The guide assumes a basic working knowledge of
LANs (Local Area Networks) and the Internet Protocol (IP).
How This Guide
is Organized
The organization of this guide is based on the AP’s web management interface. An
introduction and initial configuration information is also provided.
The guide includes these sections:
Section I “Getting Started” — Includes an introduction to AP management and
initial configuration settings.
Section II “Web Configuration” — Includes all management options available
through the web interface.
Section III “Appendices” — Includes information on troubleshooting AP
management access.
Related
Documentation
This guide focuses on AP software configuration, it does not cover hardware
installation of an AP. For specific information on how to install an AP, see the
following guide:
Quick Start Guide
For all safety information and regulatory statements, see the following documents:
Quick Start Guide
To Next Page
Loading...
Need help?
General
