Chapter 3
| Network Settings
Hotspot Settings
– 53 –
No Authentication — This option shows the hotspot guest your
customized, locally hosted captive portal splash page, and will not require
the guest to login before accessing the Internet. If you fill out the (optional)
terms of service text, the guest will be required to accept these before they
can access the Internet.
Simple Password-Only Splash Page — This option will show the hotspot
guest your customized, locally hosted captive portal splash page, and will
require them to enter a simple password to login and access the Internet. If
y
ou fill out the (optional) terms of service text, the guest will be required to
accept these before they can access the Internet.
Local Spash Page with External RADIUS — This option shows the
hotspot guest your customized, locally hosted captive portal splash page,
and will require them to enter a valid RADIUS username and password to
login and access the I
nternet. If you fill out the (o
ptional) terms of service
text, the guest will be required to accept these before they can access the
Internet.
Network IP — Specifies the IP address for the hotspot. Valid IP addresses
consist of four decimal numbers, 0 to 255, separated by periods. (Default:
192.168.182.1)
If your WAN subnet conflicts with any of the local networks (even the custom
ones you create), the AP will aut
omatically change the su
bnet of the local
network.
Network Mask — Network mask for the associated IP subnet. This mask
identifies the host address bits used for routing to specific subnets.
DHCP Start — Starting number of (last numeric field) in address pool.
(Range: 1-254; Default: 10)
DHCP End — Ending number of (last numeric field) in address pool.
(Range: 1-254; Default: 254)
DHCP Lease Time — The duration that an IP address is assigned to a DHCP
client. (Range: 600-43200 seconds; Default: 600 seconds)
DHCP Gateway — Configure the DHCP gate IP address if you want to use an
external DHCP server instead of the internal one.
DHCP Gateway Port — The listening port used by the DHCP gateway.
Smart Isolation — Activate to prevent Hotspot users to possibly access WAN
resources.
To Next Page
Loading...
Need help?
General
