4. Connector caution label
This label describes lock of the connector.
The label instructs operators to prevent the connectors from being disconnected while the STP
pump is in operation.
Figure 4 - Connector caution label
5. Voltage rating label
This label describes the rated voltage of the SCU-1601. Use voltage specified in this label.
Figure 5 - Voltage rating label
6. Applicable pump model label
This label describes an applicable pump model to STC-U. Use this model of STP pump when
using STC-U. (xxxxxxxxxxxx: is the model name of the pump)
Figure 6 - Applicable pump model label
To Next Page
Loading...
